分布式文件系统 FastDFS 与nginx 结合

fastdfs github地址:https://github.com/happyfish100

(1)注意FastDFS 5+版本以后去除了http内值模块,如药使用http下载需要结合nginx 或apache使用

(2)如果nginx 模块make 的时候出现如下错误,请检查fastdfs-nginx-module 和 fastdfs的版本是否一致,fastdfs 5.11 对应 fastdfs-nginx-module 1.20  https://github.com/happyfish100/fastdfs-nginx-module/issues/10

 

local/fastdfs-nginx-module/src/common.c:1245: 错误:‘FDFSHTTPParams’没有名为‘support_multi_range’的成员
make[1]: *** [objs/addon/src/ngx_http_fastdfs_module.o] 错误 1
make[1]: Leaving directory `/usr/local/nginx-1.10.1'

 

 

 

 

 

操作系统 CentOS release 6.5 (Final) 64

nginx相关软件

FastDFS相关软件

FastDFS_v5.11

libfastcommon

   fastdfs-nginx-module 1.20
 

拓扑图

二、tracker的安装与配置

1.安装

以下操作是在 tracker 10.10.10.124上操作

通过rz工具,把软件上传到/usr/local/src目录下,如果没有rz工具,可以使用 yum -y install lrzsz 安装


[root@tracker src]# ls
FastDFS_v5.04.tar.gz
[root@tracker src]# tar xf FastDFS_v5.04.tar.gz 
[root@tracker src]# cd FastDFS
[root@tracker FastDFS]# ll
总用量 132
drwxr-xr-x. 3 8980 users  4096 921 22:14 client
drwxr-xr-x. 2 8980 users  4096 921 22:14 common
drwxr-xr-x. 2 8980 users  4096 921 22:14 conf
-rw-r--r--. 1 8980 users 35067 921 22:14 COPYING-3_0.txt
-rw-r--r--. 1 8980 users  2802 921 22:14 fastdfs.spec
-rw-r--r--. 1 8980 users 31224 921 22:14 HISTORY
drwxr-xr-x. 2 8980 users  4096 921 22:14 init.d
-rw-r--r--. 1 8980 users  7755 921 22:14 INSTALL
-rwxr-xr-x. 1 8980 users  5735 921 22:14 make.sh
drwxr-xr-x. 2 8980 users  4096 921 22:14 php_client
-rw-r--r--. 1 8980 users  2380 921 22:14 README.md
-rwxr-xr-x. 1 8980 users  1768 921 22:14 restart.sh
-rwxr-xr-x. 1 8980 users  1680 921 22:14 stop.sh
drwxr-xr-x. 4 8980 users  4096 921 22:14 storage
drwxr-xr-x. 2 8980 users  4096 921 22:14 test
drwxr-xr-x. 2 8980 users  4096 921 22:14 tracker
[root@tracker FastDFS]# ./make.sh 

执行make.sh 遇到的错误



[root@tracker FastDFS]# ./make.sh 
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o ../common/fdfs_global.o ../common/fdfs_global.c  -I../common -I/usr/include/fastcommon
../common/fdfs_global.c:20:20: 错误:logger.h:没有那个文件或目录
在包含自 ../common/fdfs_global.c:21 的文件中:
../common/fdfs_global.h:14:27: 错误:common_define.h:没有那个文件或目录
../common/fdfs_global.h:16:29: 错误:connection_pool.h:没有那个文件或目录
In file included from ../common/fdfs_global.c:21:
../common/fdfs_global.h:26: 错误:‘MAX_PATH_SIZE’未声明(不在函数内)
../common/fdfs_global.h:27: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_fdfs_version’
../common/fdfs_global.h:28: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_use_connection_pool’
../common/fdfs_global.h:29: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_connection_pool’
../common/fdfs_global.c:23: 错误:‘DEFAULT_CONNECT_TIMEOUT’未声明(不在函数内)
../common/fdfs_global.c:24: 错误:‘DEFAULT_NETWORK_TIMEOUT’未声明(不在函数内)
../common/fdfs_global.c:26: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_fdfs_version’
../common/fdfs_global.c:27: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_use_connection_pool’
../common/fdfs_global.c:28: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_connection_pool’
../common/fdfs_global.c: 在函数‘fdfs_check_data_filename’中:
../common/fdfs_global.c:39: 警告:隐式声明函数‘logError’
../common/fdfs_global.c:45: 警告:隐式声明函数‘IS_UPPER_HEX’
make: *** [../common/fdfs_global.o] 错误 1
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o ../common/fdfs_global.o ../common/fdfs_global.c  -I. -Itrunk_mgr -I../common -I../tracker -I../client -Ifdht_client -I/usr/include/fastcommon
../common/fdfs_global.c:20:20: 错误:logger.h:没有那个文件或目录
在包含自 ../common/fdfs_global.c:21 的文件中:
../common/fdfs_global.h:14:27: 错误:common_define.h:没有那个文件或目录
../common/fdfs_global.h:16:29: 错误:connection_pool.h:没有那个文件或目录
In file included from ../common/fdfs_global.c:21:
../common/fdfs_global.h:26: 错误:‘MAX_PATH_SIZE’未声明(不在函数内)
../common/fdfs_global.h:27: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_fdfs_version’
../common/fdfs_global.h:28: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_use_connection_pool’
../common/fdfs_global.h:29: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_connection_pool’
../common/fdfs_global.c:23: 错误:‘DEFAULT_CONNECT_TIMEOUT’未声明(不在函数内)
../common/fdfs_global.c:24: 错误:‘DEFAULT_NETWORK_TIMEOUT’未声明(不在函数内)
../common/fdfs_global.c:26: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_fdfs_version’
../common/fdfs_global.c:27: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_use_connection_pool’
../common/fdfs_global.c:28: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_connection_pool’
../common/fdfs_global.c: 在函数‘fdfs_check_data_filename’中:
../common/fdfs_global.c:39: 警告:隐式声明函数‘logError’
../common/fdfs_global.c:45: 警告:隐式声明函数‘IS_UPPER_HEX’
make: *** [../common/fdfs_global.o] 错误 1
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o ../common/fdfs_global.o ../common/fdfs_global.c  -I../common -I../tracker -I/usr/include/fastcommon
../common/fdfs_global.c:20:20: 错误:logger.h:没有那个文件或目录
在包含自 ../common/fdfs_global.c:21 的文件中:
../common/fdfs_global.h:14:27: 错误:common_define.h:没有那个文件或目录
../common/fdfs_global.h:16:29: 错误:connection_pool.h:没有那个文件或目录
In file included from ../common/fdfs_global.c:21:
../common/fdfs_global.h:26: 错误:‘MAX_PATH_SIZE’未声明(不在函数内)
../common/fdfs_global.h:27: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_fdfs_version’
../common/fdfs_global.h:28: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_use_connection_pool’
../common/fdfs_global.h:29: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_connection_pool’
../common/fdfs_global.c:23: 错误:‘DEFAULT_CONNECT_TIMEOUT’未声明(不在函数内)
../common/fdfs_global.c:24: 错误:‘DEFAULT_NETWORK_TIMEOUT’未声明(不在函数内)
../common/fdfs_global.c:26: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_fdfs_version’
../common/fdfs_global.c:27: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_use_connection_pool’
../common/fdfs_global.c:28: 错误:expected ‘=’, ‘,’, ‘;’, ‘asmor ‘__attribute__’ before ‘g_connection_pool’
../common/fdfs_global.c: 在函数‘fdfs_check_data_filename’中:
../common/fdfs_global.c:39: 警告:隐式声明函数‘logError’
../common/fdfs_global.c:45: 警告:隐式声明函数‘IS_UPPER_HEX’
make: *** [../common/fdfs_global.o] 错误 1

看 源码目录下的INSTALL文件发现,需要安装 libfastcommon


#step 1. download libfastcommon source package from github and install it,
   the github address:
   https://github.com/happyfish100/libfastcommon.git

到如上的网址下载 libfastcommon进行安装,上传至服务器的src目录下



[root@tracker src]# unzip libfastcommon-master.zip 
[root@tracker src]# cd libfastcommon-master
[root@tracker libfastcommon-master]# ls
HISTORY  INSTALL  libfastcommon.spec  make.sh  README  src
[root@tracker libfastcommon-master]# ./make.sh 
[root@tracker libfastcommon-master]# ./make.sh install
mkdir -p /usr/lib64
install -m 755 libfastcommon.so /usr/lib64
mkdir -p /usr/include/fastcommon
install -m 644 common_define.h hash.h chain.h logger.h base64.h shared_func.h pthread_func.h ini_file_reader.h _os_bits.h sockopt.h sched_thread.h http_func.h md5.h local_ip_func.h avl_tree.h ioevent.h ioevent_loop.h fast_task_queue.h fast_timer.h process_ctrl.h fast_mblock.h connection_pool.h /usr/include/fastcommon

至此libfastcommon安装完成。

再回到 FastDFS目录下来安装FastDFS


[root@tracker libfastcommon-master]# cd ../FastDFS
[root@tracker FastDFS]# ./make.sh 
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o ../common/fdfs_global.o ../common/fdfs_global.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_proto.o tracker_proto.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_mem.o tracker_mem.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_service.o tracker_service.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_status.o tracker_status.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_global.o tracker_global.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_func.o tracker_func.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o fdfs_shared_func.o fdfs_shared_func.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_nio.o tracker_nio.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_relationship.o tracker_relationship.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_dump.o tracker_dump.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o ../common/linux_stack_trace.o ../common/linux_stack_trace.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -o fdfs_trackerd fdfs_trackerd.c  ../common/fdfs_global.o tracker_proto.o tracker_mem.o tracker_service.o tracker_status.o tracker_global.o tracker_func.o fdfs_shared_func.o tracker_nio.o tracker_relationship.o tracker_dump.o ../common/linux_stack_trace.o -L/usr/local/lib  -lpthread -ldl -rdynamic -lfastcommon -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_client_thread.o tracker_client_thread.c  -I. -Itrunk_mgr -I../common -I../tracker -I../client -Ifdht_client -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o storage_global.o storage_global.c  -I. -Itrunk_mgr -I../common -I../tracker -I../client -Ifdht_client -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o storage_func.o storage_func.c  -I. -Itrunk_mgr -I../common -I../tracker -I../client -Ifdht_client -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o storage_service.o storage_service.c  -I. -Itrunk_mgr -I../common -I../tracker -I../client -Ifdht_client -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o storage_sync.o storage_sync.c  -I. -Itrunk_mgr -I../common -I../tracker -I../client -Ifdht_client -I/usr/include/fastcommon
...
[root@tracker FastDFS]# ./make.sh install
mkdir -p /usr/bin
mkdir -p /etc/fdfs
cp -f fdfs_trackerd /usr/bin
if [ ! -f /etc/fdfs/tracker.conf.sample ]; then cp -f ../conf/tracker.conf /etc/fdfs/tracker.conf.sample; fi
mkdir -p /usr/bin
mkdir -p /etc/fdfs
cp -f fdfs_storaged  /usr/bin
if [ ! -f /etc/fdfs/storage.conf.sample ]; then cp -f ../conf/storage.conf /etc/fdfs/storage.conf.sample; fi
mkdir -p /usr/bin
mkdir -p /etc/fdfs
mkdir -p /usr/lib64
cp -f fdfs_monitor fdfs_test fdfs_test1 fdfs_crc32 fdfs_upload_file fdfs_download_file fdfs_delete_file fdfs_file_info fdfs_appender_test fdfs_appender_test1 fdfs_append_file fdfs_upload_appender /usr/bin
if [ 0 -eq 1 ]; then cp -f libfdfsclient.a /usr/lib64; fi
if [ 1 -eq 1 ]; then cp -f libfdfsclient.so /usr/lib64; fi
mkdir -p /usr/include/fastdfs
cp -f ../common/fdfs_define.h ../common/fdfs_global.h ../common/mime_file_parser.h ../common/fdfs_http_shared.h ../tracker/tracker_types.h ../tracker/tracker_proto.h ../tracker/fdfs_shared_func.h ../storage/trunk_mgr/trunk_shared.h tracker_client.h storage_client.h storage_client1.h client_func.h client_global.h fdfs_client.h /usr/include/fastdfs
if [ ! -f /etc/fdfs/client.conf.sample ]; then cp -f ../conf/client.conf /etc/fdfs/client.conf.sample; fi

至此FastDFS在 tracker上安装完成,所有的可执行文件位于 /usr/bin 目录下,以fdfs开头的文件


[root@tracker FastDFS]# ll /usr/bin/fd*
-rwxr-xr-x. 1 root root 257631 1028 11:29 /usr/bin/fdfs_appender_test
-rwxr-xr-x. 1 root root 257424 1028 11:29 /usr/bin/fdfs_appender_test1
-rwxr-xr-x. 1 root root 247664 1028 11:29 /usr/bin/fdfs_append_file
-rwxr-xr-x. 1 root root 247340 1028 11:29 /usr/bin/fdfs_crc32
-rwxr-xr-x. 1 root root 247723 1028 11:29 /usr/bin/fdfs_delete_file
-rwxr-xr-x. 1 root root 248850 1028 11:29 /usr/bin/fdfs_download_file
-rwxr-xr-x. 1 root root 248584 1028 11:29 /usr/bin/fdfs_file_info
-rwxr-xr-x. 1 root root 260848 1028 11:29 /usr/bin/fdfs_monitor
-rwxr-xr-x. 1 root root 886610 1028 11:29 /usr/bin/fdfs_storaged
-rwxr-xr-x. 1 root root 264031 1028 11:29 /usr/bin/fdfs_test
-rwxr-xr-x. 1 root root 263208 1028 11:29 /usr/bin/fdfs_test1
-rwxr-xr-x. 1 root root 374872 1028 11:29 /usr/bin/fdfs_trackerd
-rwxr-xr-x. 1 root root 248730 1028 11:29 /usr/bin/fdfs_upload_appender
-rwxr-xr-x. 1 root root 249676 1028 11:29 /usr/bin/fdfs_upload_file
[root@tracker FastDFS]# 

所有的配置文件在 /etc/fdfs/ 目录下


[root@tracker FastDFS]# ll /etc/fdfs/
总用量 20
-rw-r--r--. 1 root root 1461 1028 11:29 client.conf.sample
-rw-r--r--. 1 root root 7647 1028 11:29 storage.conf.sample
-rw-r--r--. 1 root root 7102 1028 11:29 tracker.conf.sample
[root@tracker FastDFS]# 

至此 FastDFS在tracker上安装完成,以下进行配置

2. 配置

进入到 /etc/fdfs 目录下,复制模版文件到 tracker.conf



[root@tracker fdfs]# cp tracker.conf.sample tracker.conf

创建数据文件和日志文件目录


[root@tracker fdfs]# mkdir -pv /data/fastdfs/tracker
mkdir: 已创建目录 "/data"
mkdir: 已创建目录 "/data/fastdfs"
mkdir: 已创建目录 "/data/fastdfs/tracker"

编辑 tracker.conf 文件,测试的时候只需要修改以下参数即可


disabled=false                        #启用配置文件
port=22122                            #设置 tracker 的端口号
base_path=/data/fastdfs/tracker       #设置 tracker 的数据文件和日志目录(需预先创建)
http.server_port=8080                 #设置 http 端口号

这个http.server_port=8080 指的是在tracker服务器上启动http服务进程,如:apache或者nginx 启动时所监听的端口,这个似乎是可以不用管的,因为tracker本身就没有安装http服务

3.运行

直接使用 fdfs_trackerd 来启动tracker进程,然后使用netstat 查看端口是否起来。



[root@tracker fdfs]# fdfs_trackerd /etc/fdfs/tracker.conf restart
[root@tracker fdfs]# netstat -antp | grep trackerd
tcp        0      0 0.0.0.0:22122               0.0.0.0:*                   LISTEN      14520/fdfs_trackerd 
[root@tracker fdfs]# 

也可以查看日志看服务是否正常运行


[root@tracker tracker]# cat /data/fastdfs/tracker/logs/trackerd.log 
[2014-10-28 13:53:43] INFO - FastDFS v5.04, base_path=/data/fastdfs/tracker, run_by_group=, run_by_user=, connect_timeout=30s, network_timeout=60s, port=22122, bind_addr=, max_connections=256, accept_threads=1, work_threads=4, store_lookup=2, store_group=, store_server=0, store_path=0, reserved_storage_space=10.00%, download_server=0, allow_ip_count=-1, sync_log_buff_interval=10s, check_active_interval=120s, thread_stack_size=64 KB, storage_ip_changed_auto_adjust=1, storage_sync_file_max_delay=86400s, storage_sync_file_max_time=300s, use_trunk_file=0, slot_min_size=256, slot_max_size=16 MB, trunk_file_size=64 MB, trunk_create_file_advance=0, trunk_create_file_time_base=02:00, trunk_create_file_interval=86400, trunk_create_file_space_threshold=20 GB, trunk_init_check_occupying=0, trunk_init_reload_from_binlog=0, trunk_compress_binlog_min_interval=0, use_storage_id=0, id_type_in_filename=ip, storage_id_count=0, rotate_error_log=0, error_log_rotate_time=00:00, rotate_error_log_size=0, log_file_keep_days=0, store_slave_file_use_link=0, use_connection_pool=0, g_connection_pool_max_idle_time=3600s
[2014-10-28 13:53:43] INFO - local_host_ip_count: 2,  127.0.0.1  10.10.10.124

4.设置开机自动启动


[root@tracker tracker]# echo "/usr/bin/fdfs_trackerd /etc/fdfs/tracker.conf restart" >> /etc/rc.local
[root@tracker tracker]# cat /etc/rc.local
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
/usr/bin/fdfs_trackerd /etc/fdfs/tracker.conf restart
[root@tracker tracker]# 

至此tracker上的安装与配置结束。

三、storage的安装与配置

1.安装

以下操作是在 10.10.10.120 storage1上操作

利用上传 FastDFS_v5.04.tar.gz 和 libfastcommon-master.zip 至 storage服务器的/usr/local/src 目录下


[root@server1 src]# rz
rz waiting to receive.
Starting zmodem transfer.  Press Ctrl+C to cancel.
Transferring FastDFS_v5.04.tar.gz...
  100%     335 KB     335 KB/sec    00:00:01       0 Errors  
[root@server1 src]# ls
FastDFS_v5.04.tar.gz
[root@server1 src]# rz
rz waiting to receive.
Starting zmodem transfer.  Press Ctrl+C to cancel.
Transferring libfastcommon-master.zip...
  100%      95 KB      95 KB/sec    00:00:01       0 Errors  
[root@server1 src]# ll
总用量 432
-rw-r--r-- 1 root root 343477 1027 09:26 FastDFS_v5.04.tar.gz
-rw-r--r-- 1 root root  97548 1028 11:14 libfastcommon-master.zip
[root@server1 src]# 

解压安装 libfastcommon


[root@server1 src]# unzip libfastcommon-master.zip 
[root@server1 libfastcommon-master]# ll
总用量 24
-rw-r--r-- 1 root root 2397 1026 11:53 HISTORY
-rw-r--r-- 1 root root  582 1026 11:53 INSTALL
-rw-r--r-- 1 root root 1341 1026 11:53 libfastcommon.spec
-rwxr-xr-x 1 root root 2151 1026 11:53 make.sh
-rw-r--r-- 1 root root  617 1026 11:53 README
drwxr-xr-x 2 root root 4096 1026 11:53 src
[root@server1 libfastcommon-master]# ./make.sh 
cc -Wall -D_FILE_OFFSET_BITS=64 -g -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -fPIC -o hash.lo hash.c  
cc -Wall -D_FILE_OFFSET_BITS=64 -g -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -fPIC -o chain.lo chain.c  
cc -Wall -D_FILE_OFFSET_BITS=64 -g -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -fPIC -o shared_func.lo shared_func.c  
cc -Wall -D_FILE_OFFSET_BITS=64 -g -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -fPIC -o ini_file_reader.lo ini_file_reader.c  
cc -Wall -D_FILE_OFFSET_BITS=64 -g -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -fPIC -o logger.lo logger.c  
cc -Wall -D_FILE_OFFSET_BITS=64 -g -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -fPIC -o sockopt.lo sockopt.c  
cc -Wall -D_FILE_OFFSET_BITS=64 -g -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -fPIC -o base64.lo base64.c  
...
[root@server1 libfastcommon-master]# ./make.sh install
mkdir -p /usr/lib64
install -m 755 libfastcommon.so /usr/lib64
mkdir -p /usr/include/fastcommon
install -m 644 common_define.h hash.h chain.h logger.h base64.h shared_func.h pthread_func.h ini_file_reader.h _os_bits.h sockopt.h sched_thread.h http_func.h md5.h local_ip_func.h avl_tree.h ioevent.h ioevent_loop.h fast_task_queue.h fast_timer.h process_ctrl.h fast_mblock.h connection_pool.h /usr/include/fastcommon

解压安装 FastDFS_v5.04.tar.gz


[root@server1 src]# tar xf FastDFS_v5.04.tar.gz 
[root@server1 src]# cd FastDFS
[root@server1 FastDFS]# ll
总用量 132
drwxr-xr-x 3 8980 users  4096 9月  21 22:14 client
drwxr-xr-x 2 8980 users  4096 9月  21 22:14 common
drwxr-xr-x 2 8980 users  4096 9月  21 22:14 conf
-rw-r--r-- 1 8980 users 35067 9月  21 22:14 COPYING-3_0.txt
-rw-r--r-- 1 8980 users  2802 9月  21 22:14 fastdfs.spec
-rw-r--r-- 1 8980 users 31224 9月  21 22:14 HISTORY
drwxr-xr-x 2 8980 users  4096 9月  21 22:14 init.d
-rw-r--r-- 1 8980 users  7755 9月  21 22:14 INSTALL
-rwxr-xr-x 1 8980 users  5735 9月  21 22:14 make.sh
drwxr-xr-x 2 8980 users  4096 9月  21 22:14 php_client
-rw-r--r-- 1 8980 users  2380 9月  21 22:14 README.md
-rwxr-xr-x 1 8980 users  1768 9月  21 22:14 restart.sh
-rwxr-xr-x 1 8980 users  1680 9月  21 22:14 stop.sh
drwxr-xr-x 4 8980 users  4096 9月  21 22:14 storage
drwxr-xr-x 2 8980 users  4096 9月  21 22:14 test
drwxr-xr-x 2 8980 users  4096 9月  21 22:14 tracker
[root@server1 FastDFS]# 
[root@server1 FastDFS]# ./make.sh 
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o ../common/fdfs_global.o ../common/fdfs_global.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_proto.o tracker_proto.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_mem.o tracker_mem.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_service.o tracker_service.c  -I../common -I/usr/include/fastcommon
cc -Wall -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -g -O -DDEBUG_FLAG -DOS_LINUX -DIOEVENT_USE_EPOLL -c -o tracker_status.o tracker_status.c  -I../common -I/usr/include/fastcommon
...
[root@server1 FastDFS]# ./make.sh install
mkdir -p /usr/bin
mkdir -p /etc/fdfs
cp -f fdfs_trackerd /usr/bin
if [ ! -f /etc/fdfs/tracker.conf.sample ]; then cp -f ../conf/tracker.conf /etc/fdfs/tracker.conf.sample; fi
mkdir -p /usr/bin
mkdir -p /etc/fdfs
cp -f fdfs_storaged  /usr/bin
if [ ! -f /etc/fdfs/storage.conf.sample ]; then cp -f ../conf/storage.conf /etc/fdfs/storage.conf.sample; fi
mkdir -p /usr/bin
mkdir -p /etc/fdfs
mkdir -p /usr/lib64
cp -f fdfs_monitor fdfs_test fdfs_test1 fdfs_crc32 fdfs_upload_file fdfs_download_file fdfs_delete_file fdfs_file_info fdfs_appender_test fdfs_appender_test1 fdfs_append_file fdfs_upload_appender /usr/bin
if [ 0 -eq 1 ]; then cp -f libfdfsclient.a /usr/lib64; fi
if [ 1 -eq 1 ]; then cp -f libfdfsclient.so /usr/lib64; fi
mkdir -p /usr/include/fastdfs
cp -f ../common/fdfs_define.h ../common/fdfs_global.h ../common/mime_file_parser.h ../common/fdfs_http_shared.h ../tracker/tracker_types.h ../tracker/tracker_proto.h ../tracker/fdfs_shared_func.h ../storage/trunk_mgr/trunk_shared.h tracker_client.h storage_client.h storage_client1.h client_func.h client_global.h fdfs_client.h /usr/include/fastdfs
if [ ! -f /etc/fdfs/client.conf.sample ]; then cp -f ../conf/client.conf /etc/fdfs/client.conf.sample; fi

安装完成后,可执行文件在/usr/bin/下以 fdfs 开头


[root@server1 FastDFS]# ll /usr/bin/fdfs_*
-rwxr-xr-x 1 root root 257631 1028 14:18 /usr/bin/fdfs_appender_test
-rwxr-xr-x 1 root root 257424 1028 14:18 /usr/bin/fdfs_appender_test1
-rwxr-xr-x 1 root root 247664 1028 14:18 /usr/bin/fdfs_append_file
-rwxr-xr-x 1 root root 247340 1028 14:18 /usr/bin/fdfs_crc32
-rwxr-xr-x 1 root root 247723 1028 14:18 /usr/bin/fdfs_delete_file
-rwxr-xr-x 1 root root 248850 1028 14:18 /usr/bin/fdfs_download_file
-rwxr-xr-x 1 root root 248584 1028 14:18 /usr/bin/fdfs_file_info
-rwxr-xr-x 1 root root 260848 1028 14:18 /usr/bin/fdfs_monitor
-rwxr-xr-x 1 root root 886610 1028 14:18 /usr/bin/fdfs_storaged
-rwxr-xr-x 1 root root 264031 1028 14:18 /usr/bin/fdfs_test
-rwxr-xr-x 1 root root 263208 1028 14:18 /usr/bin/fdfs_test1
-rwxr-xr-x 1 root root 374872 1028 14:18 /usr/bin/fdfs_trackerd
-rwxr-xr-x 1 root root 248730 1028 14:18 /usr/bin/fdfs_upload_appender
-rwxr-xr-x 1 root root 249676 1028 14:18 /usr/bin/fdfs_upload_file
[root@server1 FastDFS]# 

配置文件在 /etc/fdfs 目录下


[root@server1 FastDFS]# ll /etc/fdfs/
总用量 20
-rw-r--r-- 1 root root 1461 1028 14:18 client.conf.sample
-rw-r--r-- 1 root root 7647 1028 14:18 storage.conf.sample
-rw-r--r-- 1 root root 7102 1028 14:18 tracker.conf.sample
[root@server1 FastDFS]# 

2.配置

进入到 /etc/fdfs 目录下,复制/usr/local/src/FastDFS/conf/* 下面的所有文件到当前目录下(/etc/fdfs)


[root@server1 FastDFS]# cd /etc/fdfs/
[root@server1 fdfs]# cp /usr/local/src/FastDFS/conf/* .
[root@server1 fdfs]# ll
总用量 64
-rw-r--r-- 1 root root  1461 1029 14:33 client.conf
-rw-r--r-- 1 root root   858 1029 14:33 http.conf
-rw-r--r-- 1 root root 31172 1029 14:33 mime.types
-rw-r--r-- 1 root root  3697 1029 14:34 mod_fastdfs.conf
-rw-r--r-- 1 root root  7646 1028 14:34 storage.conf
-rw-r--r-- 1 root root   105 1029 14:33 storage_ids.conf
-rw-r--r-- 1 root root  7102 1029 14:33 tracker.conf
[root@server1 fdfs]# 

编辑配置文件 storage.conf 测试的时候,只需修改以下内容即可


[root@server1 fdfs]# vim storage.conf
disabled=false                        #启用配置文件
group_name=group1                     #组名,根据实际情况修改
port=23000                            #设置 storage 的端口号
base_path=/data/fastdfs/storage       #设置 storage 的日志目录(需预先创建)
store_path_count=1                    #存储路径个数,需要和 store_path 个数匹配
store_path0=/data/fastdfs/storage     #存储路径
tracker_server=10.10.10.124:22122     #tracker 服务器的 IP 地址和端口号
http.server_port=8080                 #设置storage上启动的http服务的端口号,如安装的nginx的端口号

3.运行


[root@server1 fdfs]# fdfs_storaged /etc/fdfs/storage.conf restart

查看端口是否起来



[root@server1 fdfs]# netstat -antp | grep storage
tcp        0      0 0.0.0.0:23000               0.0.0.0:*                   LISTEN      10316/fdfs_storaged 
[root@server1 fdfs]# 

观察日志 /data/fastdfs/storage/logs/storaged.log 看运行情况


mkdir data path: FB ...
mkdir data path: FC ...
mkdir data path: FD ...
mkdir data path: FE ...
mkdir data path: FF ...
data path: /data/fastdfs/storage/data, mkdir sub dir done.
[2014-10-28 14:42:55] INFO - file: storage_param_getter.c, line: 191, use_storage_id=0, id_type_in_filename=ip, storage_ip_changed_auto_adjust=1, store_path=0, reserved_storage_space=10.00%, use_trunk_file=0, slot_min_size=256, slot_max_size=16 MB, trunk_file_size=64 MB, trunk_create_file_advance=0, trunk_create_file_time_base=02:00, trunk_create_file_interval=86400, trunk_create_file_space_threshold=20 GB, trunk_init_check_occupying=0, trunk_init_reload_from_binlog=0, trunk_compress_binlog_min_interval=0, store_slave_file_use_link=0
[2014-10-28 14:42:55] INFO - file: storage_func.c, line: 175, tracker_client_ip: 10.10.10.120, my_server_id_str: 10.10.10.120, g_server_id_in_filename: 2013923850
[2014-10-28 14:42:55] INFO - local_host_ip_count: 2,  127.0.0.1  10.10.10.120
[2014-10-28 14:42:55] INFO - file: tracker_client_thread.c, line: 310, successfully connect to tracker server 10.10.10.124:22122, as a tracker client, my ip is 10.10.10.120
[2014-10-28 14:43:25] INFO - file: tracker_client_thread.c, line: 1235, tracker server 10.10.10.124:22122, set tracker leader: 10.10.10.124:22122

看到先创建二级目录,然后已经成功连接到tracker

可以使用 fdfs_monitor 来查看一下storage的状态,看是否已经成功注册到了tracker


[root@server2 logs]# fdfs_monitor /etc/fdfs/storage.conf

也可以以下命令来监控服务器的状态


[root@tracker ~]# fdfs_monitor /etc/fdfs/client.conf

结果如下:


[2014-10-28 15:57:54] DEBUG - base_path=/data/fastdfs/storage, connect_timeout=30, network_timeout=60, tracker_server_count=1, anti_steal_token=0, anti_steal_secret_key length=0, use_connection_pool=0, g_connection_pool_max_idle_time=3600s, use_storage_id=0, storage server id count: 0
server_count=1, server_index=0
tracker server is 10.10.10.124:22122
group count: 1
Group 1:
group name = group1
disk total space = 14020 MB
disk free space = 10267 MB
trunk free space = 0 MB
storage server count = 2
active server count = 2
storage server port = 23000
storage HTTP port = 8080
store path count = 1
subdir count per path = 256
current write server index = 0
current trunk file id = 0
	Storage 1:
		id = 10.10.10.120
		ip_addr = 10.10.10.120  ACTIVE
		http domain = 
		version = 5.04
		join time = 2014-10-28 14:42:43
		up time = 2014-10-28 14:42:43
		total storage = 14020 MB
		free storage = 10385 MB
		upload priority = 10
		store_path_count = 1
		subdir_count_per_path = 256
		storage_port = 23000
		storage_http_port = 8080
		current_write_path = 0
		source storage id = 
		if_trunk_server = 0
		connection.alloc_count = 256
		connection.current_count = 1
		connection.max_count = 1
		total_upload_count = 0
		success_upload_count = 0
		total_append_count = 0
		success_append_count = 0
		total_modify_count = 0
		success_modify_count = 0
		total_truncate_count = 0
		success_truncate_count = 0
		total_set_meta_count = 0
		success_set_meta_count = 0
		total_delete_count = 0
		success_delete_count = 0
		total_download_count = 0
		success_download_count = 0
		total_get_meta_count = 0
		success_get_meta_count = 0
		total_create_link_count = 0
		success_create_link_count = 0
		total_delete_link_count = 0
		success_delete_link_count = 0
		total_upload_bytes = 0
		success_upload_bytes = 0
		total_append_bytes = 0
		success_append_bytes = 0
		total_modify_bytes = 0
		success_modify_bytes = 0
		stotal_download_bytes = 0
		success_download_bytes = 0
		total_sync_in_bytes = 0
		success_sync_in_bytes = 0
		total_sync_out_bytes = 0
		success_sync_out_bytes = 0
		total_file_open_count = 0
		success_file_open_count = 0
		total_file_read_count = 0
		success_file_read_count = 0
		total_file_write_count = 0
		success_file_write_count = 0
		last_heart_beat_time = 2014-10-28 15:56:42
		last_source_update = 1970-01-01 08:00:00
		last_sync_update = 1970-01-01 08:00:00
		last_synced_timestamp = 1970-01-01 08:00:00 
	Storage 2:
		id = 10.10.10.122
		ip_addr = 10.10.10.122 (shizhouliang.mobimtech.local)  ACTIVE
		http domain = 
		version = 5.04
		join time = 2014-10-28 15:53:51
		up time = 2014-10-28 15:53:51
		total storage = 14020 MB
		free storage = 10267 MB
		upload priority = 10
		store_path_count = 1
		subdir_count_per_path = 256
		storage_port = 23000
		storage_http_port = 8080
		current_write_path = 0
		source storage id = 10.10.10.120
		if_trunk_server = 0
		connection.alloc_count = 256
		connection.current_count = 1
		connection.max_count = 1
		total_upload_count = 0
		success_upload_count = 0
		total_append_count = 0
		success_append_count = 0
		total_modify_count = 0
		success_modify_count = 0
		total_truncate_count = 0
		success_truncate_count = 0
		total_set_meta_count = 0
		success_set_meta_count = 0
		total_delete_count = 0
		success_delete_count = 0
		total_download_count = 0
		success_download_count = 0
		total_get_meta_count = 0
		success_get_meta_count = 0
		total_create_link_count = 0
		success_create_link_count = 0
		total_delete_link_count = 0
		success_delete_link_count = 0
		total_upload_bytes = 0
		success_upload_bytes = 0
		total_append_bytes = 0
		success_append_bytes = 0
		total_modify_bytes = 0
		success_modify_bytes = 0
		stotal_download_bytes = 0
		success_download_bytes = 0
		total_sync_in_bytes = 0
		success_sync_in_bytes = 0
		total_sync_out_bytes = 0
		success_sync_out_bytes = 0
		total_file_open_count = 0
		success_file_open_count = 0
		total_file_read_count = 0
		success_file_read_count = 0
		total_file_write_count = 0
		success_file_write_count = 0
		last_heart_beat_time = 2014-10-28 15:56:53
		last_source_update = 1970-01-01 08:00:00
		last_sync_update = 1970-01-01 08:00:00
		last_synced_timestamp = 1970-01-01 08:00:00 

看到ACTIVE,就说明已经成功注册到了tracker。

4.设置开机启动


[root@server1 fdfs]# echo "/usr/bin/fdfs_storaged /etc/fdfs/storage.conf restart" >> /etc/rc.local
[root@server1 fdfs]# cat /etc/rc.local
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
/usr/bin/fdfs_storaged /etc/fdfs/storage.conf restart

至此 storage 已经成功安装,再把另外一台服务器也同样的步骤进行安装。

等第二台storage2(10.10.10.122)安装完成并成功启动后,看日志会发现



[2014-10-28 15:54:05] INFO - file: storage_sync.c, line: 2698, successfully connect to storage server 10.10.10.120:23000

说明已经成功连接到另外一台storage了。

也可以使用


[root@server2 logs]# fdfs_monitor /etc/fdfs/storage.conf

来查看一下storage2的状态

四、在storage上安装配置nginx

以下操作是在 storage1 10.10.10.120 上操作

1.安装nginx

上传 fastdfs-nginx-module_v1.16.tar.gz nginx-1.4.7.tar.gz pcre-8.36.tar.gz zlib-1.2.8.tar.gz 到storage服务器上的/usr/local/src 目录下


[root@server1 src]# rz
rz waiting to receive.
Starting zmodem transfer.  Press Ctrl+C to cancel.
Transferring fastdfs-nginx-module_v1.16.tar.gz...
  100%      17 KB      17 KB/sec    00:00:01       0 Errors  
Transferring nginx-1.4.7.tar.gz...
  100%     751 KB     751 KB/sec    00:00:01       0 Errors  
Transferring pcre-8.36.tar.gz...
  100%    1962 KB    1962 KB/sec    00:00:01       0 Errors  
Transferring zlib-1.2.8.tar.gz...
  100%     557 KB     557 KB/sec    00:00:01       0 Errors  

解压各个文件,然后编译安装nginx



[root@server1 src]# tar xf nginx-1.4.7.tar.gz 
[root@server1 src]# tar xf pcre-8.36.tar.gz 
[root@server1 src]# tar xf zlib-1.2.8.tar.gz 
[root@server1 src]# tar xf fastdfs-nginx-module_v1.16.tar.gz 
[root@server1 src]# cd nginx-1.4.7
[root@server1 nginx-1.4.7]# ls
auto  CHANGES  CHANGES.ru  conf  configure  contrib  html  LICENSE  man  README  src
[root@server1 nginx-1.4.7]# ./configure --prefix=/usr/local/nginx --add-module=/usr/local/src/fastdfs-nginx-module/src --with-pcre=/usr/local/src/pcre-8.36 --with-zlib=/usr/local/src/zlib-1.2.8

出现以下错误:


cc -c -pipe  -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Werror -g  -D_FILE_OFFSET_BITS=64 -DFDFS_OUTPUT_CHUNK_SIZE='256*1024' -DFDFS_MOD_CONF_FILENAME='"/etc/fdfs/mod_fastdfs.conf"'  -I src/core -I src/event -I src/event/modules -I src/os/unix -I /usr/local/include/fastdfs -I /usr/local/include/fastcommon/ -I /usr/local/src/pcre-8.36 -I /usr/local/src/zlib-1.2.8 -I objs -I src/http -I src/http/modules -I src/mail \
	-o objs/addon/src/ngx_http_fastdfs_module.o \
	/usr/local/src/fastdfs-nginx-module/src/ngx_http_fastdfs_module.c
在包含自 /usr/local/src/fastdfs-nginx-module/src/ngx_http_fastdfs_module.c:6 的文件中:
/usr/local/src/fastdfs-nginx-module/src/common.c:21:25: 错误:fdfs_define.h:没有那个文件或目录
/usr/local/src/fastdfs-nginx-module/src/common.c:22:20: 错误:logger.h:没有那个文件或目录
/usr/local/src/fastdfs-nginx-module/src/common.c:23:25: 错误:shared_func.h:没有那个文件或目录
/usr/local/src/fastdfs-nginx-module/src/common.c:24:25: 错误:fdfs_global.h:没有那个文件或目录
/usr/local/src/fastdfs-nginx-module/src/common.c:25:21: 错误:sockopt.h:没有那个文件或目录
/usr/local/src/fastdfs-nginx-module/src/common.c:26:23: 错误:http_func.h:没有那个文件或目录
/usr/local/src/fastdfs-nginx-module/src/common.c:27:30: 错误:fdfs_http_shared.h:没有那个文件或目录
/usr/local/src/fastdfs-nginx-module/src/common.c:28:25: 错误:fdfs_client.h:没有那个文件或目录
/usr/local/src/fastdfs-nginx-module/src/common.c:29:27: 错误:local_ip_func.h:没有那个文件或目录
/usr/local/src/fastdfs-nginx-module/src/common.c:30:30: 错误:fdfs_shared_func.h:没有那个文件或目录
/usr/local/src/fastdfs-nginx-module/src/common.c:31:26: 错误:trunk_shared.h:没有那个文件或目录

以上的这个错误是由于没找到 头文件导致的,找了找原因,在编译fastdf模块的时候会找这个地方/usr/local/include寻找fastdfs主程序的fastcommon和fastdfs这2个目录下的头文件,但是在编译安装的fastdfs主程序的时候,却把这2个目录放到了/usr/include下面了,于是复制这2个目录到/usr/local/include下



[root@server1 src]# cp -rf /usr/include/fast* /usr/local/include/
[root@server1 src]# ls /usr/local/include/
fastcommon  fastdfs
[root@server1 src]# 

于是再次编译


[root@server1 src]# cd nginx-1.4.7
[root@server1 nginx-1.4.7]# ./configure --prefix=/usr/local/nginx --add-module=/usr/local/src/fastdfs-nginx-module/src --with-pcre=/usr/local/src/pcre-8.36 --with-zlib=/usr/local/src/zlib-1.2.8
[root@server1 nginx-1.4.7]# make && make install 

这次终于编译安装通过。

2.准备启动脚本

编辑 /etc/init.d/nginx,如下内容:


#!/bin/bash
# nginx Startup script for the Nginx HTTP Server
# it is v.1.4.7 version.
# chkconfig: - 85 15
# description: Nginx is a high-performance web and proxy server.
# It has a lot of features, but it's not for everyone.
# processname: nginx
# pidfile: /usr/local/nginx/logs/nginx.pid
# config: /usr/local/nginx/conf/nginx.conf
nginxd=/usr/local/nginx/sbin/nginx
nginx_config=/usr/local/nginx/conf/nginx.conf
nginx_pid=/usr/local/nginx/logs/nginx.pid
nginx_lock=/var/lock/subsys/nginx
RETVAL=0
prog="nginx"
# Source function library.
. /etc/rc.d/init.d/functions
# Source networking configuration.
. /etc/sysconfig/network
# Check that networking is up.
[ ${NETWORKING} = "no" ] && exit 0
[ -x $nginxd ] || exit 0
# Start nginx daemons functions.
start() {
	nginx_is_run=`ps -ef | egrep 'nginx:\s*(worker|master)\s*process' | wc -l`
	if [ ${nginx_is_run} -gt 0 ];then
		echo "nginx already running...."
		exit 1
	fi
	echo -n $"Starting $prog: "
	daemon $nginxd -c ${nginx_config}
	RETVAL=$?
	echo
	[ $RETVAL = 0 ] && touch ${nginx_lock}
	return $RETVAL
}
# Stop nginx daemons functions.
stop() {
	echo -n $"Stopping $prog: "
	killproc $nginxd
	RETVAL=$?
	echo
	[ $RETVAL = 0 ] && rm -f ${nginx_lock} ${nginx_pid}
}
# Reload nginx config file
reload() {
	echo -n $"Reloading $prog: "
	#kill -HUP `cat ${nginx_pid}`
	killproc $nginxd -HUP
	RETVAL=$?
	echo
}
# See how we were called.
case "$1" in
	start)
		start
		;;
	stop)
		stop
		;;
	reload)
		reload
		;;
	restart)
		  stop
		start
		;;
	status)
		status $prog
		RETVAL=$?
		;;
	*)
		echo $"Usage: $prog {start|stop|restart|reload|status|help}"
		exit 1
esac

3.将 FastDFS 的 nginx 插件模块的配置文件

copy 到 FastDFS 配置文件目录


[root@server1 src]# cp fastdfs-nginx-module/src/mod_fastdfs.conf /etc/fdfs/

4.修改nginx配置文件

① 修改nginx的监听端口

将 server 段中的 listen 端口号改为 8080:


[root@server1 nginx]# vim /usr/local/nginx/conf/nginx.conf
listen       8080;

② 在 server 段中添加fastdfs的配置

这里的group[1-3] 可以匹配 group1,group2,group3,当然group也可以是其他的名字


location ~ /group[1-3]/M00 {
            root /data/fastdfs/storage/data;
            ngx_fastdfs_module;
        }

/data/fastdfs/storage/data 这个是指向 真正存储文件的地方,该目录下有这些个二级目录


[root@server1 src]# cd /data/fastdfs/storage/data/
[root@server1 data]# ll
总用量 1036
drwxr-xr-x 258 root root 4096 1028 14:42 00
drwxr-xr-x 258 root root 4096 1028 14:42 01
drwxr-xr-x 258 root root 4096 1028 14:42 02
drwxr-xr-x 258 root root 4096 1028 14:42 03
drwxr-xr-x 258 root root 4096 1028 14:42 04
drwxr-xr-x 258 root root 4096 1028 14:42 05
drwxr-xr-x 258 root root 4096 1028 14:42 06
drwxr-xr-x 258 root root 4096 1028 14:42 07
drwxr-xr-x 258 root root 4096 1028 14:42 08
drwxr-xr-x 258 root root 4096 1028 14:42 09
drwxr-xr-x 258 root root 4096 1028 14:42 0A
drwxr-xr-x 258 root root 4096 1028 14:42 0B
drwxr-xr-x 258 root root 4096 1028 14:42 0C
drwxr-xr-x 258 root root 4096 1028 14:42 0D
drwxr-xr-x 258 root root 4096 1028 14:42 0E
drwxr-xr-x 258 root root 4096 1028 14:42 0F
drwxr-xr-x 258 root root 4096 1028 14:42 10

5.修改 fastdfs的nginx模块的配置文件 mod_fastdfs.conf

一般只需改动以下几个参数即可:


base_path=/data/fastdfs/storage      #保存日志目录
tracker_server=10.10.10.124:22122    #tracker 服务器的 IP 地址以及端口号
storage_server_port=23000            #storage 服务器的端口号
group_name=group1                    #当前服务器的 group 名
url_have_group_name = true           #文件 url 中是否有 group 名
store_path_count=1                   #存储路径个数,需要和 store_path 个数匹配
store_path0=/data/fastdfs/storage    #存储路径
http.need_find_content_type=true     # 从文件 扩展 名查 找 文件 类型 ( nginx 时 为true)
group_count = 1                      #设置组的个数

然后在末尾添加分组信息,目前只有一个分组,就只写一个


[group1]
group_name=group1
storage_server_port=23000
store_path_count=1
store_path0=/data/fastdfs/storage

6.建立 M00 至存储目录的符号连接


[root@server1 fdfs]# ln -s /data/fastdfs/storage/data /data/fastdfs/storage/data/M00
[root@server1 fdfs]# ll /data/fastdfs/storage/data/M00
lrwxrwxrwx 1 root root 26 1029 11:22 /data/fastdfs/storage/data/M00 -> /data/fastdfs/storage/data

至此nginx和FastDFS 插件模块设置完成

7.启动nginx



[root@server1 nginx]# chmod u+x /etc/init.d/nginx
[root@server1 nginx]# chkconfig --add nginx
[root@server1 nginx]# chkconfig nginx on
[root@server1 nginx]# service nginx start
正在启动 nginx:                                           [确定]
[root@server1 nginx]# service nginx status
nginx (pid 26500) 正在运行...

查看nginx的日志 错误日志logs/error.log 看是否有问题


[2014-10-29 14:35:29] INFO - local_host_ip_count: 2,  127.0.0.1  10.10.10.120
[2014-10-29 14:35:29] INFO - fastdfs apache / nginx module v1.15, response_mode=proxy, base_path=/tmp, url_have_group_name=1, group_count=1, connect_timeout=2, network_timeout=30, tracker_server_count=1, if_alias_prefix=, local_host_ip_count=2, anti_steal_token=0, token_ttl=0s, anti_steal_secret_key length=0, token_check_fail content_type=, token_check_fail buff length=0, load_fdfs_parameters_from_tracker=1, storage_sync_file_max_delay=86400s, use_storage_id=0, storage server id count=0, flv_support=1, flv_extension=flv
[2014-10-29 14:35:29] INFO - group 1. group_name=group1, storage_server_port=23000, path_count=1, store_path0=/data/fastdfs/storage

也可以访问 http://10.10.10.120:8080

看到没什么错误,至此在storage1上安装配置nginx结束。

再在storage2上以相同的步骤来安装nginx。

五、安装nginx反向代理及缓存服务器

以下操作在 10.10.10.123 上操作

1.安装nginx

将所需的软件包上传至服务器/usr/local/src下


[root@fastdfs-nginx ~]# cd /usr/local/src/
[root@fastdfs-nginx src]# ls
[root@fastdfs-nginx src]# rz
rz waiting to receive.
Starting zmodem transfer.  Press Ctrl+C to cancel.
Transferring nginx-1.4.7.tar.gz...
  100%     751 KB     751 KB/sec    00:00:01       0 Errors  
Transferring ngx_cache_purge-2.1.tar.gz...
  100%      10 KB      10 KB/sec    00:00:01       0 Errors  
Transferring pcre-8.36.tar.gz...
  100%    1962 KB    1962 KB/sec    00:00:01       0 Errors  
Transferring zlib-1.2.8.tar.gz...
  100%     557 KB     557 KB/sec    00:00:01       0 Errors  

解压各个软件包



[root@fastdfs-nginx src]# tar xf nginx-1.4.7.tar.gz 
[root@fastdfs-nginx src]# tar xf ngx_cache_purge-2.1.tar.gz 
[root@fastdfs-nginx src]# tar xf pcre-8.36.tar.gz 
[root@fastdfs-nginx src]# tar xf zlib-1.2.8.tar.gz 
[root@fastdfs-nginx src]# cd nginx-1.4.7

编译安装nginx


[root@fastdfs-nginx nginx-1.4.7]# ./configure  --prefix=/usr/local/nginx  --add-module=/usr/local/src/ngx_cache_purge-2.1  --with-pcre=/usr/local/src/pcre-8.36/  --with-zlib=/usr/local/src/zlib-1.2.8
checking for OS
 + Linux 2.6.32-431.el6.x86_64 x86_64
checking for C compiler ... found
 + using GNU C compiler
 + gcc version: 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) 
checking for gcc -pipe switch ... found
checking for gcc builtin atomic operations ... found
checking for C99 variadic macros ... found
checking for gcc variadic macros ... found
checking for unistd.h ... found
checking for inttypes.h ... found
...
Configuration summary
  + using PCRE library: /usr/local/src/pcre-8.36/
  + OpenSSL library is not used
  + md5: using system crypto library
  + sha1: using system crypto library
  + using zlib library: /usr/local/src/zlib-1.2.8
  nginx path prefix: "/usr/local/nginx"
  nginx binary file: "/usr/local/nginx/sbin/nginx"
  nginx configuration prefix: "/usr/local/nginx/conf"
  nginx configuration file: "/usr/local/nginx/conf/nginx.conf"
  nginx pid file: "/usr/local/nginx/logs/nginx.pid"
  nginx error log file: "/usr/local/nginx/logs/error.log"
  nginx http access log file: "/usr/local/nginx/logs/access.log"
  nginx http client request body temporary files: "client_body_temp"
  nginx http proxy temporary files: "proxy_temp"
  nginx http fastcgi temporary files: "fastcgi_temp"
  nginx http uwsgi temporary files: "uwsgi_temp"
  nginx http scgi temporary files: "scgi_temp"
[root@fastdfs-nginx nginx-1.4.7]# make && make install

至此 nginx 以及 nginx cache purge 插件模块安装完成。

2.配置

准备nginx的启动脚本,内容同上面的storage安装时的脚本,并加入到系统的服务,开机启动

创建nginx的缓存目录


[root@fastdfs-nginx nginx]# mkdir -pv /var/cache/nginx/proxy_cache/tmp
mkdir: 已创建目录 "/var/cache/nginx"
mkdir: 已创建目录 "/var/cache/nginx/proxy_cache"
mkdir: 已创建目录 "/var/cache/nginx/proxy_cache/tmp"

增加系统打开文件数的限制


[root@fastdfs-nginx nginx]# ulimit -SHn 102400
[root@fastdfs-nginx nginx]# echo "ulimit -SHn 102400" >> /etc/rc.local

编辑 vim /usr/local/nginx/conf/nginx.conf 文件修改以下内容:


user  nobody;
worker_processes  1;
error_log  logs/error.log  info;
pid		logs/nginx.pid;
events {
	worker_connections  65535;
	use epoll;
}
http {
	include	   mime.types;
	default_type  application/octet-stream;
	sendfile		on;
	tcp_nopush	 on;
	keepalive_timeout  65;
	server_names_hash_bucket_size 128;
	client_header_buffer_size 32k;
	large_client_header_buffers 4 32k;
	client_max_body_size 300m;
	proxy_redirect off;
	proxy_set_header Host $http_host;
	proxy_set_header X-Real-IP $remote_addr;
	proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
	proxy_connect_timeout 90;
	proxy_send_timeout 90;
	proxy_read_timeout 90;
	proxy_buffer_size 16k;
	proxy_buffers 4 64k;
	proxy_busy_buffers_size 128k;
	proxy_temp_file_write_size 128k;
	#设置缓存存储路径、存储方式、分配内存大小、磁盘最大空间、缓存期限
	proxy_cache_path  /var/cache/nginx/proxy_cache  levels=1:2
	keys_zone=http-cache:500m max_size=10g inactive=30d;
	proxy_temp_path /var/cache/nginx/proxy_cache/tmp;
	#设置 group1 的服务器
	upstream fdfs_group1 {
		server 10.10.10.120:8080 weight=1 max_fails=2 fail_timeout=30s;
		server 10.10.10.122:8080 weight=1 max_fails=2 fail_timeout=30s;
	}
	log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
					  '$status $body_bytes_sent "$http_referer" '
					  '"$http_user_agent" "$http_x_forwarded_for"';
	server {
		listen	   80;
		server_name  localhost;
		access_log  logs/host.access.log  main;
	#设置 group1 的反向代理参数
	location /group1/M00 {
		proxy_next_upstream http_502 http_504 error timeout invalid_header;
		proxy_cache http-cache;
		proxy_cache_valid 200 304 12h;
		proxy_cache_key $uri$is_args$args;
		proxy_pass http://fdfs_group1;
		expires 30d;
	}
	#设置清除缓存的访问权限
		location ~ /purge(/.*) {
		allow 127.0.0.1;
		allow 10.10.10.0/24;
		deny all;
		proxy_cache_purge http-cache $1$is_args$args;
	} 
	}
}

使用 /usr/local/nginx/sbin/nginx -t 来测试配置文件语法的正确性


[root@fastdfs-nginx nginx]# ./sbin/nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful

3.启动nginx


[root@fastdfs-nginx nginx]# service nginx start
正在启动 nginx[确定]

查看监听的端口



[root@fastdfs-nginx conf]# netstat -antp | grep nginx
tcp        0      0 0.0.0.0:80                  0.0.0.0:*                   LISTEN      20526/nginx         
[root@fastdfs-nginx conf]# 

六、测试上传文件

以下操作在tracker服务器(10.10.10.124)上进行

1.创建client 使用的日志目录


[root@tracker tracker]# mkdir -pv /data/fastdfs/client
mkdir: 已创建目录 "/data/fastdfs/client"

2. 修改客户端的配置文件/etc/fdfs/client.conf

修改以下参数即可:


base_path=/data/fastdfs/client #日志存放路径
tracker_server=10.10.10.124:22122 #tracker 服务器 IP 地址和端口号
http.tracker_server_port=8080 #tracker 服务器的 http 端口号 ,这一项感觉没什么用处,tracker都没有启用http服务

3.上传一个图片



[root@tracker ~]# fdfs_upload_file /etc/fdfs/client.conf 1.jpg
group1/M00/00/00/CgoKeFRQqaaASsgNAAEgRqu1UiU712.jpg
[root@tracker ~]# 

得到了一个如上的一个地址 group1/M00/00/00/CgoKeFRQqaaASsgNAAEgRqu1UiU712.jpg

可以使用fdfs_file_info 来查看上传文件的信息


[root@tracker ~]# fdfs_file_info /etc/fdfs/client.conf group1/M00/00/00/CgoKeFRQqaaASsgNAAEgRqu1UiU712.jpg
source storage id: 0
source ip address: 10.10.10.120
file create timestamp: 2014-10-29 16:47:34
file size: 73798
file crc32: 2880786981 (0xABB55225)

这个信息里面可以看到 这个文件上传的时候 首先上传到了10.10.10.120这台服务器,文件的创建时间、文件的大小

4.使用浏览器访问一下该地址

完整的URL是这样的 http://10.10.10.123/group1/M00/00/00/CgoKeFRQqaaASsgNAAEgRqu1UiU712.jpg

10.10.10.123 就是nginx反向代理缓存服务器

成功访问到图片

查看一下nginx的访问日志,可以看到状态码是 200OK.



[root@fastdfs-nginx ~]# tail -1 /usr/local/nginx/logs/host.access.log 
10.10.10.46 - - [29/Oct/2014:16:48:43 +0800] "GET /group1/M00/00/00/CgoKeFRQqaaASsgNAAEgRqu1UiU712.jpg HTTP/1.1" 200 73798 "-" "Mozilla/5.0 (Windows NT 6.1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/35.0.1916.153 Safari/537.36" "-"
[root@fastdfs-nginx ~]# 

查看nginx的缓存目录,看是否已经缓存成功


[root@fastdfs-nginx ~]# ll -R /var/cache/nginx/proxy_cache/ 
/var/cache/nginx/proxy_cache/:
总用量 8
drwx------. 3 nobody nobody 4096 1029 16:47 e
drwxr-xr-x. 2 nobody root   4096 1029 16:47 tmp
/var/cache/nginx/proxy_cache/e:
总用量 4
drwx------. 2 nobody nobody 4096 1029 16:47 a8
/var/cache/nginx/proxy_cache/e/a8:
总用量 76
-rw-------. 1 nobody nobody 74110 1029 16:47 54408edb44f74ab4da965506f54a6a8e  在此已经缓存成功
/var/cache/nginx/proxy_cache/tmp:
总用量 0
[root@fastdfs-nginx ~]# 

5. 清除缓存

若要清除该图片的缓存,可以在文件 URL 之前加上 purge 即可,如下图

http://10.10.10.123/purge/group1/M00/00/00/CgoKeFRQqaaASsgNAAEgRqu1UiU712.jpg

6. 配置浏览器端查看是否命中缓存

可以使用Chrome浏览器的开发工具,查看响应的头部信息来查看是否命中缓存,要启用此功能,修改nginx的主配置文件如下:

在location /group1/M00 段增加这2个行


add_header  X-Via  $server_addr;
add_header  X-Cache-Status $upstream_cache_status;

最终效果


location /group1/M00 {
	proxy_next_upstream http_502 http_504 error timeout invalid_header;
	proxy_cache http-cache;
	proxy_cache_valid 200 304 12h;
	proxy_cache_key $uri$is_args$args;
	proxy_pass http://fdfs_group1;
	expires 30d;
	add_header  X-Via  $server_addr;
	add_header  X-Cache-Status $upstream_cache_status;
        }

重启nginx


[root@fastdfs-nginx ~]# service nginx restart
停止 nginx[确定]
正在启动 nginx[确定]
[root@fastdfs-nginx ~]# 

清空chrome浏览器的缓存,清除那张图片在nginx中的缓存

第一次访问

显示MISS,代表缓存中没有

第二次 ctrl+F5 强制刷新访问

已经显示HIT,代表已经命中缓存

至此 FastDFS + nginx 反向代理缓存搭建完毕。

七、优化部分

1、Tracker优化

1)    max_connections=10000或更大响应参数增大内存消耗增加该参数需修改单一进程同时可打开文件数量(* soft nofile 65536 * hard nofile 65536)的限制后生效。
2)    work_threads=12 cpu数量此处设置cpu核心数量
3)    thread_stack_size=256
测试配置如下

 work_threads=12
    thread_stack_size=256
    max_connections=65535

2、Storage优化

work_threads= work_threads + 1 + (disk_reader_threads + disk_writer_threads) * store_path_count= 15

disk_rw_separated:磁盘读写是否分离
disk_reader_threads:单个磁盘读线程数
disk_writer_threads:单个磁盘写线程数
如果磁盘读写混合,单个磁盘读写线程数为读线程数和写线程数之后
对于单盘挂载方式,磁盘读写线程分别设置为1即可
如果磁盘做了RAID,那么需要酌情加大读写线程数,这样才能最大程度地发挥磁盘性能
buff_size=512增大提升磁盘IO的另外一个技巧,一次尽可能多写入或多读取。也就是说,将程序的读写buffer设置得尽可能大一些。例如日志或者redo log的写入,不是每次调用都直接写磁盘,而是先缓存到内存中,等buffer满了再写入磁盘,也可以定时写入磁盘。
测试配置如下

thread_stack_size=512KB  
	disk_reader_threads = 4
	disk_writer_threads = 4
	buff_size=512
	max_connections=65535
	accept_threads=10
	work_threads=16a

以上配置压力测试上传并发2w 事务平均响应时间0.46秒,4w事务平均响应时间2.2秒。

八、FastDFS使用流程

1.上传文件

FastDFS 提供了多种方式上传文件:


使用 fdfs_upload_file 上传
使用 C 语言客户端接口上传
使用 PHP 客户端接口上传
使用 Java 客户端接口上传
使用 Python 客户端接口上传
使用.NET 客户端接口上传

根据具体情况选择使用。上传均支持断点续传。

如果Java的客户端,在API的配置文件中配置 tracker服务器,如果有多个tracker服务器,就配置多台

WEB-INF/classes/fdfs_client.conf


connect_timeout = 2
network_timeout = 30
charset = UTF-8
http.tracker_http_port = 8080
http.anti_steal_token = no
http.secret_key = FastDFS1234567890
 
tracker_server =192.168.10.27:22122
tracker_server = 192.168.10.28:22122

2.下载文件

使用 fdfs_download_file 通过 tracker 服务器下载
使用 nginx 通过 http 方式直接从 storage 下载(支持断点续传,作者推荐)

3.监视服务器资源

使用 fdfs_monitor 查看 tracker 和所有 group 的运行情况


[root@tracker ~]# fdfs_monitor /etc/fdfs/client.conf
[2014-10-31 14:09:20] DEBUG - base_path=/data/fastdfs/client, connect_timeout=30, network_timeout=60, tracker_server_count=1, anti_steal_token=0, anti_steal_secret_key length=0, use_connection_pool=0, g_connection_pool_max_idle_time=3600s, use_storage_id=0, storage server id count: 0
server_count=1, server_index=0
tracker server is 10.10.10.124:22122
group count: 1
Group 1:
group name = group1
disk total space = 14020 MB
disk free space = 10224 MB
trunk free space = 0 MB
storage server count = 2
active server count = 2
storage server port = 23000
storage HTTP port = 8080
store path count = 1
subdir count per path = 256
current write server index = 1
current trunk file id = 0
        Storage 1:
	 id = 10.10.10.120
	 ip_addr = 10.10.10.120  ACTIVE
	 http domain =
	 version = 5.04
	 join time = 2014-10-28 14:42:43
	 up time = 2014-10-29 14:14:44
	 total storage = 14020 MB
....
 Storage 2:
	 id = 10.10.10.122
	 ip_addr = 10.10.10.122  ACTIVE
	 http domain = 
	 version = 5.04
	 join time = 2014-10-28 15:53:51
	 up time = 2014-10-28 15:53:51
	 total storage = 14020 MB
....

 

4.其他功能

使用 fdfs_crc32 获取文件 CRC
使用 fdfs_delete_file 删除文件
使用 fdfs_file_info 查看文件属性信息
 

上传下载版本二:

FastDFS安装包中,自带了客户端程序,通过程序可以进行文件上传。在使用这个客户端程序之前,首先需要配置client.conf,然后再进行文件上传及下载。

 

1、修改%FastDFS%/conf/client.conf文件,修改如下:
#可自定义,但此目录必须存在,用于存放文件上传log

Txt代码   收藏代码
  1. base_path=/home/yuqing/fastdfs-> base_path=/home/soar/fastdfs_tracker  
Txt代码   收藏代码
  1. tracker_server=192.168.209.121:22122 -> tracker_server=10.0.2.15:22122  
Txt代码   收藏代码
  1. http.tracker_server_port=8080 ->http.tracker_server_port=8090  

 #支持http

Txt代码   收藏代码
  1. ##include http.conf ->#include http.conf   
 

2、进入/usr/local/bin/目录,上传文件,执行

Txt代码   收藏代码
  1. sudo fdfs_test %FastDFS%/conf/client.conf upload a.txt   

注:a.txt可以在/usr/local/bin/目录下自己创建一个

 

如果命令行反馈类似如下:

则说明上传文件成功。

二、下载文件

在浏览器中,输入上图中的url地址, tracker server会自动重定向到存储文件的storage server,文件下载成功。

至此,已经成功搭建了FastDFS,编写你自己的client来进行访问吧:)

 

 
 
已标记关键词 清除标记
©️2020 CSDN 皮肤主题: 成长之路 设计师:Amelia_0503 返回首页
实付 49.90元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、C币套餐、付费专栏及课程。

余额充值